Products
Structural Components
   
  Primary Members
   
  Primary members are made from steel plates conforming to IS 2062 or equivalent with minimum yield strength of 340 Mpa. All primary members are supplied with a coat of Red Oxide primer.
   
 
   
  Secondary Members
   
  All the secondary members are made from Pre-Galvanized steel of 120/180/275 GSM coating and steel plates conforming to IS 1161/2062 or equivalent with minimum yield strength of 340 Mpa. All secondary members are available in a thickness range of 1.2 mm to 2.5 mm and supplied with a coat of Red Oxide primer (if not made from GI).